|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2.125 Gb/s Integrated 850nm MSM-TIA AMT8301 Data Sheet - Rev 2.1 FEATURES * * * * * * Differential Output TIA 3.3V Operation Automatic Gain Control Integrated 850nm MSM Detector & TIA TO-46 Ultra Flat-Window or Lens Hermetic Package High Reliability APPLICATIONS * 2x Fibre Channel (2.125 Gb/s) T46F TO-46 Ultra Flat Window Package T46L TO-46 Lens Package PRODUCT DESCRIPTION The ANADIGICS AMT8301 is a 3.3V monolithically integrated Metal-Semiconductor-Metal (MSM) photodetector and transimpedance amplifier (TIA) used to convert an 850nm input optical signal into a differential output voltage, and is manufactured in ANADIGICS 6 GaAs wafer fabrication facility. The integrated MSM and TIA receiver maximizes the receiver performance by minimizing the photodetector input parasitics to the TIA and V DD 2 internally biasing the photodetector to achieve high sensitivity, bandwidth and overload performance. As an integrated product the reliability is inherently better than a discrete solution, and both the MSM-TIA integrated circuit and TO46 flat window and TO46 lens packaged receiver pass stringent reliability requirements. These products are readily designed into receivers and transceivers for 2X Fibre Channel applications. OUT 1 3 OUT AGC US Patents: 5047728, 5646573 PIN Charge Pump 7.5 GHz Osc 4 Figure 1: AMT8301 Equivalent Ciruit 03-2001 1 AMT8301 Figure 2: T46F/T46L Pin Outline (Bottom View) Table 1: Package PIN Description PIN 1 2 3 4 D ESC R IPTION VOUT - TIA Output Voltage (non-Inverted) VDD - Posi ti ve Supply Voltage VOUT - TIA Output Voltage (Inverted) Ground C OMMEN T Logi cal '1' wi th opti cal i nput +3.3 Volts Logi cal '0' wi th opti cal i nput C ase i s grounded ELECTRICAL CHARACTERISTICS Table 2: Absolute Maximum Ratings V DD PIN TS 6.0V +5dBm Storage Temp. - 65 C to 125 C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. 2 Data Sheet - Rev 2.1 03-2001 AMT8301 Table 3: Electrical Characteristics PAR AMETER Wavelength ( l) D etector D i ameter Small Si gnal D i fferenti al Responsi vi ty (@ 50 MHz) Bandwi dth(1) Low Frequency C utoff Output Resi stance Opti cal Overload (2) (1) MIN 770 1000 1400 0 -19 (3) TYP 850 100 1900 40 750 140 5 50 35 +3.3 - MAX 860 300 55 +3.6 80 U N IT nm m V/W MHz kHz W dB m dB m mV ps % ps mA Volts C Opti cal Sensi ti vi ty (2) D i fferenti al Output Voltage TRISE and TFALL (20-80%) (3) D uty C ycle D i storti on (3) Total Ji tter (3), (4) Supply C urrent Operati ng Voltage Range Operati ng C ase Temperature Range + 3.0 0 Notes: (1) Measured at 14 dBm optical input power with output connected into RL = 100W (differential) (2) Measured at 10-10 BER with a 27-1 PRBS at 2.125 Gb/s (3) Measured with a 27-1 PRBS at 2.125 Gb/s, an input optical power of -3dBm and RL = 100 W (differential) (4) 6 s about the center eye crossing Data Sheet - Rev 2.1 03-2001 3 AMT8301 PERFORMANCE DATA Figure 3: Eye Diagram with an Optical Input Power of -18dBm 10mV/Div 100ps/Div Figure 4: Eye Diagram with an Optical Input Power of -8.0dBm 60mV/Div. 100ps/Div Figure 5: Eye Diagram with an Optical Input Power of 0dBm 150mV/Div. 4 Data Sheet - Rev 2.1 03-2001 100ps/Div AMT8301 Figure 6: Supply Current vs. Temperature 50.0 45.0 40.0 35.0 3V Bandwidth (MHz) Figure 7: Bandwidth vs. Temperature 2400 2200 2000 1800 1600 1400 1200 1000 3V 3.3V 3.6V Supply Current (mA) 30.0 25.0 0 20 40 60 3.3V 3.6V 80 100 0 20 40 60 80 100 Case Temperature (C) Case Temperature (C) Figure 8: Differential Responsivity vs. Temperature 1500 Differential Responsivity (V/W) Figure 9: Sensitivity vs. Temperature -18.00 -18.50 Sensitivity (dBm) 1400 1300 1200 1100 1000 900 0 20 40 60 80 100 Case Temperature (C) 3V 3.3V 3.6V -19.00 -19.50 -20.00 -20.50 -21.00 -21.50 -22.00 0 20 40 60 80 100 Case Temperature (C) 3V 3.3V 3.6V Data Sheet - Rev 2.1 03-2001 5 AMT8301 MEASUREMENT METHODS Lightwave Analyzer HP 8702D Laser Optical Attenuator DUT Test Fixture Extinction Ratio= 3dB Power Supply Figure 11: Test Setup for Frequency Response BERT Pulse Pattern Generator Error Detector Hybrid Coupler Limiting Amplifier 25 dB Gain Laser Optical Attenuator DUT Test Fixture Extinction Ratio = 9dB Power Supply Figure 12: Test Setup for Sensitivity Pulse Pattern Generator Digital Communication Analyzer HP83480A Laser Optical Attenuator DUT Test Fixture Extinction Ratio = 9dB Power Supply Figure 13: Test Setup for Eye Measurements 6 Data Sheet - Rev 2.1 03-2001 AMT8301 VDD 0.1uF VOUT 0.1uF DUT 0.1 uF VOUT Figure 3: DUT Test Fixture Schematic APPLICATION INFORMATION V DD 0.1uF 2 OUT 1 CF 3 0.1uF RO 0.1uF OUT AGC LIMITING AMPLIFIER Charge Pump 7.5 GHz OSC 4 Figure 14: Application Schematic CF is an optional single pole noise filter CF = 1 2 fcR fc is the desired cutoff frequency R = 50 W RO is required with high input resistance limiting amplifiers RO = 100 W Data Sheet - Rev 2.1 03-2001 7 AMT8301 PACKAGE OUTLINE Figure 15: T46F Package Outline Diagram 8 Data Sheet - Rev 2.1 03-2001 AMT8301 Figure 16: T46L Package Outline Diagram Data Sheet - Rev 2.1 03-2001 9 AMT8301 NOTES 10 Data Sheet - Rev 2.1 03-2001 AMT8301 NOTES Data Sheet - Rev 2.1 03-2001 11 AMT8301 ORDERING INFORMATION Part N umber AMT8301T46F AMT8301T46L Package Option TO-46F TO-46L Package D escription Ultra Flat Wi ndow Package Lens Package ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 http://www.anadigics.com Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a products formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. Data Sheet - Rev. 1 03-2001 12 |
Price & Availability of AMT8301 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |